According to the CDC every year about 25% of adults falls, and 20% of these falls results in injuries. Falls in bathrooms are one of the causes of falls, which commonly happen in the shower and at the toilet. Installing grab bars in both of these locations is a recommended action to mitigate the risks of a fall.
What are safety bars / grab bars?
Safety bars, also known as grab bars are devices that provide support and improve stability. They are installed in locations where a person may need to maneuver or perform tasks with limited mobility or use of their extremities.
How long does it take to install a grab bar?
Installing safety bars is a relatively fast project when they are installed directly in drywall, and identifying a structural member such a stud location is possible. Installation time increases when grab bars are installed over tile, ceramic, porcelain, or very thick or hard media. In these situations special tools will be required to identify adequate anchor points and to drill the support holes.
How much does it cost to install a grab bar?
The cost to install a grab bar depends on the choice of bar and labor. Most grab bars range between $15 and $75; however, some luxury models may be much higher.
The labor cost to install a grab bar depends on the substrate where the grab bar will be installed, whether it is a drywall wall, a shower wall with tile/porcelain or other materials such as marble or granite. For a directional estimate, labor can start at $160 and be as high as $450 per grab bar; price may decrease when multiple grab bars are installed in the same visit.
If there is no available structural support to affix the safety bar to (such as a stud), special anchors may be required, which will increase the price range referenced above.
Would like an estimate? let us know about your project by email, phone or using our contact form. Details at the bottom of this page.
How difficult is it to install a safety bar?
Usually installing grab bars/safety bars is not a complex task; however, it is a project that requires both training and special tools.
Finding structural supports where to affix the grab bars requires specialized tools. Also, special drilling equipment will be required if the substrate is porcelain, ceramic, granite, quartz, or glass. In some cases where there is no structural support available, special anchors may be required in order to achieve the desired strength in the grab bar.
Since grab bars entail a safety objective and function we strongly recommend that you chose
a responsible, skilled professional to install the grab bars in your home.
Who can install a grab bar?
Several trades including handyman, plumbers, contractors, can install your grab bars. We at ServiceBeaver are ready to assist you with your grab bars/safety bars installation needs. Again, we do recommend that when choosing your installer you verify their experience and track record to ensure that you will have a professional, responsible installation that will meet your safety needs and expectations.
Access Ramps
Improve accessibility to your home or business with access ramps
What are access ramps?
Access ramps are mechanical devices built to allow and/or facilitate transit of individuals. Access ramps are uniquely helpful when a person has limited mobility and needs to access an elevated area, or needs to overcome an obstacle.
Access ramps are commonly used in commercial environments for accessibility. In private homes or buildings access ramps enable people with limited mobility access to the premises.
Where to install access ramps?
.
What materials are used to build access ramps?
Depending on the size ramps may be manufactured of aluminum, wood, concrete, ferrous metal, stone, or other materials. Ramps may be temporary or permanent, and the choice of materials will determine the longevity and duty cycle (commercial/private).
How difficult is to build/install an access ramp?
Installation or construction of access ramps depends on its size, duty cycle, and expected useful life. Small ramps may be purchased pre-manufactured and ready to assemble/install on-site. Larger ramps may be built to size. For more information contact us with questions, we will be happy to assist.
Where does ServiceBeaver operate?
We install grab bars and access ramps in Keller, Southlake, Colleyville, Trophy Club, Westlake, Eastlake, Roanoke, Watauga, Saginaw, Coppell, Bedford, Euless, Hurst, Haltom City, Lewisville, North Richland Hills, Grapevine, Fort Worth, Haslet, Denton, Dallas, Carrollton, Arlington, Plano, Garland, Mansfield, Frisco, among other cities. If your city is not listed please contact us and we will discuss alternatives with you.
Are you ready to hire or would like to learn more?
